Hobbyist Nirvana
Hobbyist Nirvana 1:43 Race Bundle — 8 x 5 ft Hairpin Mat + 2 Drift Cars + Foam Boundary Kit
Hobbyist Nirvana 1:43 Race Bundle — 8 x 5 ft Hairpin Mat + 2 Drift Cars + Foam Boundary Kit
Couldn't load pickup availability
Two Cars. Ten Corners. One Box.
Our complete 1:43 starting grid. You get the 8 x 5 ft hairpin circuit mat, two ready-to-run drift cars that are close enough in pace for a real race, and 10 metres of foam boundary to keep the action on the track. Unroll it, lay the boundaries along the kerbs, charge both cars and go — this is the whole hobby in a single order, for ₹3,348 less than buying the pieces one by one.
Two cars, two characters
A bundle with one car is a toy; a bundle with two is a race. The BMW M3 runs a gyro, so it holds a slide and forgives a clumsy throttle — the easier car to learn on. The Hellcat has no gyro, so it is looser and rewards the driver who has put the laps in.
A real circuit, not a bare floor
The 8 x 5 ft hairpin mat gives you a 5.73 m lap of linked 180s, a 1476 mm straight, kerbs, apex clipping marks and a checkered start line. Tile grout stops deciding your lap times.
Foam boundaries that forgive
10 metres of slit pipe insulation lays straight onto the mat edge. Soft enough that a missed apex bounces the car back onto the track instead of into a chair leg.
One box, one order
Cars, transmitters, LiPo packs, USB chargers, mat and boundaries all arrive together. Charge, unroll, race. Add 2 x AA cells for the Hellcat’s transmitter — those are the only thing not in the box.
What’s Inside — And What It Costs Separately
Every item below is on sale on its own page. Click through and add it up — the bundle is cheaper than buying the same four things one at a time.
| Item | Bought separately |
|---|---|
|
Enoze Hellcat 1:43 4WD RTR drift car LED lights, 2.4 GHz, rechargeable |
₹3,599 |
|
BMW M3 1:43 4WD drift car with gyro Gyro-assisted, 15 km/h, proportional 2.4 GHz |
₹4,750 |
|
8 x 5 ft Hairpin Circuit drift mat 5.73 m lap, 10 corners, 280 mm lane |
₹3,499 |
|
Foam boundary kit — 10 x 1 m (bundle exclusive) Slit pipe insulation, soft track limits |
₹499 |
| Total if bought separately |
|
| Bundle price | ₹8,999 |
You save ₹3,348 (27% off) versus buying the mat and both cars separately — and the foam boundary kit is only available in this bundle.
Specifications
| Spec | Detail |
|---|---|
| Bundle contents | 1 x hairpin mat, 2 x 1:43 drift cars, 10 x 1 m foam boundary lengths |
| Mat size | 8 x 5 ft (2438 x 1524 mm) |
| Layout | Hairpin circuit — sweeper into three linked 180s, 10 corners |
| Lap length | 5.73 m, with a 1476 mm main straight |
| Track width | 280 mm (5.8 car widths at 1:43) — fits 2–3 cars wheel-to-wheel |
| Cars | Enoze Hellcat 1:43 4WD RTR + BMW M3 1:43 4WD with gyro |
| Boundary kit | 10 x 1 m slit foam pipe insulation, ~20 mm bore |
| Best for | 1:43 and 1:76 scale drift / micro RC cars |
| Design | Hobbyist Nirvana original mat artwork |
How The Foam Boundaries Work
The mat prints the track; the foam makes it physical. Each 1 m length is slit down one side, so it sits flat and stays put on the printed kerb line. Use it on the hairpin exits first — that is where a 1:43 car runs wide — then extend along the sweeper as you get quicker. Because it is closed-cell foam, a car that clips it is deflected rather than stopped, so a missed apex costs you time instead of ending the run.
Why buy from Hobbyist Nirvana?
Dispatch in 24–48 hours • Free shipping across India • GST-inclusive pricing •
COD & UPI accepted • Free 10-minute video call before you buy • WhatsApp support •
7-day returns
Share
