MJX Hyper Go 16210 Brushless 1/16 RC Car 2.4G Remote Control 4WD Off-road Racing High Speed Electric Hobby Toy

• 1 × MJX Hyper Go 16210 RC Car (fully assembled)
• 1 × 2.4GHz Remote Controller
• 1 × 7.4V 1050mAh 25C Rechargeable Battery
• 1 × USB Charging Cable
• 1 × Operating Instructions
• 1 × Original Gift Box Packaging

Note: AA batteries for the remote controller are not included.

1. Charge the battery using the included USB cable — full charge takes approximately 12 minutes.
2. Insert AA batteries into the remote controller (not included).
3. Power on the car first, then the remote — always this order so they bind correctly.
4. Place on a flat surface and do a slow test run before pushing to full throttle.
5. Adjust trim dials on the remote if the car drifts left or right when driving straight.
6. Start at 50% throttle — learn the car's turning radius and response before going full send.

💡 Tip: The 12-minute charge time means you can run a battery flat, charge it during a short break, and be back racing quickly. A spare battery eliminates the wait entirely.

The MJX 16210 uses a 7.4V 1050mAh 25C LiPo (Lithium Polymer) battery. Key things to know:

• Charge time is ~12 minutes using the included USB cable — one of the quickest in its class.
• Never fully discharge the battery — when you notice a significant drop in speed, stop and charge. Running LiPo cells flat permanently reduces capacity.
• Charge at room temperature — avoid charging in direct sunlight or inside a hot car.
• Runtime of ~12.5 minutes is at typical racing speeds. Driving at moderate throttle extends this.
• Storage: If not using the car for more than a week, store the battery at around 50% charge in a cool, dry place.

Bottom line: Pick the 16210 for on-road speed, smooth surfaces, and quick-charge convenience. Pick the 16208 if you want to tackle grass, gravel, and rough terrain with an all-metal drivetrain.